Well Water

Test Your Well Water
Reminder Service

Halton Region Health Department is pleased to introduce the Test Your Well Water Reminder Service for private well owners. Sign-up to receive reminders 3 times a year to test your well water for bacteria (in spring, summer and fall).

Sign-Up Here

Is your well water safe to drink?

Testing your well water  at least 3 times every year will keep you up-to-date on the quality of your family's drinking water. It is your responsibility as a well owner to take samples, and inspect your well to ensure that your drinking water is safe. You can order a well water sample bottle for bacterial analysis  from the Health Department's website.


Halton Region Rural Drinking Water Study

Many rural homes in Halton Region receive their drinking water from private wells. In the summer of 2006, the Health Department undertook the first phase of the Halton Region Rural Drinking Water Study.

The study revealed that 37% of the homes surveyed had unacceptable water quality in terms of bacteria.

The information obtained from this study will assist the Health Department with planning and implementing activities aimed at helping rural homeowners better understand the importance of maintaining a safe water supply.

View study findings.

Who relies on private water supplies?

  • Many Halton Region residents, living primarily in rural areas, rely on private wells, cisterns or other sources for their drinking water.
  • Municipal water supplies in cities and towns are maintained and tested by Halton Region's Planning and Public Works department. However, private wells in rural areas are the responsibility of the homeowner.

top of page

What happens if I drink contaminated water?

  • Private wells can become contaminated with bacteria, nitrate, or other chemicals.
  • The effects of drinking contaminated water can range from no reaction to severe illness or even death.
  • Many factors affect the possible reaction such as the age and general health of the person, the type of contaminant, the amount, and how long the person was exposed to the contaminant.
  • Some of the effects of drinking contaminated water may happen right away, or may not be noticed for many years.

top of page

What types of contaminants could get into my well water?

Bacteria

  • When a water test shows the presence of bacteria, it is considered unsafe to drink until the problem is fixed and the well is disinfected. The bacteria may pose a health risk. An alternate drinking water supply should be used.
  • Well water may be brought to a rapid boil and boiled for one minute to make it safe for drinking. Allow it to cool, and then refrigerate in a clean container.
  • Coliform organisms are a group of bacteria that are commonly found in the environment, and are an indicator of the safety of your water. Coliform bacteria are not harmful, but their presence tells you that other disease-causing organisms may be in your water supply. The presence of more than five coliform bacteria in a water sample usually means that surface water has washed contaminants into the well.
  • E. coli bacteria live in the intestines of humans and warm blooded animals. If any amount of E. coli bacteria is found in a water sample, human sewage or animal faeces has contaminated the water supply.

Nitrates

  • The presence of nitrate in your well water is usually the result of farming activities like fertilizing or seepage from septic systems. At levels above 10 milligrams per litre of water, nitrates can interfere with an infant's blood ability to carry oxygen and could cause a condition know as "blue baby syndrome". The medical term is methaemoglobinaemia.

Herbicides and Pesticides

  • Herbicides and Pesticides from both agricultural and household use can contaminate wells if used improperly or excessively. Always read and use the amount stated on the manufacturer's label.

top of page

How can I test my well water to find out if it is safe?

  • Refer to Testing Your Well Water Supplies.
  • Follow the instructions closely or your results may not be accurate.
  • The Ontario Ministry of Health and Long-term care Public Health Lab will test well water samples for bacteria (total coliforms and E.coli) free of charge.
  • Test your well water at least three times a year for bacteria (spring and fall, and one other time).
  • Other Tests - The Health Department will test water for nitrates free of charge. Please contact the Health Department to arrange for a nitrate test.
  • Although the Health Department does not offer testing for substances other than bacteria or nitrate, public health inspectors will be pleased to advise you about other tests that may be done in relation to a specific health issue.

top of page

How can I maintain my well to prevent contamination?

Well Location

  • Make sure the well is located at a safe distance from any source of contamination such as septic systems, barnyards and roads.
  • A dug well should be at least 30 metres away from a septic system and a drilled well should be at least 15 meters away.
  • The land around a well should slope away from the well to prevent surface water from flowing to the well casing.
  • Do not store, use or dispose of garbage, manure, petroleum, salt, pesticides or any other potential contaminant near the well.

Well Construction

  • The sanitary well seal and the cap should be securely in place and watertight. If the cap is damaged or cracked, replace it right away.
  • The sanitary well seal could be a minimum of 40 centimeters above ground level. The connection at the well casing for pump and electrical lines should be watertight and properly sealed.
  • Well vent pipes should have screens to prevent anything from getting into the well.

How to Protect Your Water Supply

  • Stop liquids, waste material, garbage, or manure piles from draining towards the well.
  • Do not treat the area around the well with pesticides or fertilizer.
  • Do not flush oils, detergents, paints, solvents or other chemicals down the toilet or sink.
  • Chlorinate and flush your water supply systems after any repairs. Call the Health Department for a copy of the instructions on how to chlorinate your well.
  • Always dispose of household hazardous wastes via the Region's Household Hazardous Waste Program. Remember, waste poured into the ground can eventually get into your water supply or your neighbour's.

Tips to Save Water

  • Stop the leaks! A leak of one drip per second wastes 10,000 litres of water in one year.
  • Don't use your toilet as a garbage can.
  • Replace your toilet with an ultra low-flush toilet to greatly reduce household water consumption.
  • Install low-flow showerheads.
  • Avoid using garbage grinders as they greatly increase water use.
  • Only run your dishwasher when it is full.
  • Wash only full loads of laundry, but avoid overloading the machine.
  • If you machine has a "suds-saver" feature, be sure to use it.
  • Only water your lawn once a week. Your lawn only requires one inch of water to stay healthy. Place an empty tuna can on your lawn while you water. When the can is full stop watering. (Halton Water Efficiency Program).

top of page

Halton Region Fact Sheets

top of page

top of page

For problems or questions regarding this site, please email Halton Region or dial 311 or 905-825-6000

Toll free 1-866-4HALTON (1-866-442-5866) | TTY: 905-827-9833

Your Privacy and Our Website Terms of use

Halton Region is composed of the City of Burlington, the Town of Halton Hills, the Town of Milton, and the Town of Oakville .